Question: What Is A 7 Inch Vinyl?

Why do records play at 33 rpm?

The original acceptance of 33 1/3 by RCA in 1931 was a compromise between sound quality – the slower the rotation, the poorer the sounds quality – and quantity of recording time.

The original microgroove could hold 23 minutes of recorded music.

This was a huge increase from the 5 minutes per side of the 78..

What happens if you play a record at the wrong speed?

Playing vinyl records at the wrong speed does not do any damage. The audio will not sound as intended, but there will be no lasting extra damage if the standard RPM speeds are used.

How long is a 10 inch vinyl?

10″ Records (same size as classic 78’s) can be cut at 45 RPM or 33 1/3 RPM (we can cut them at 78 too, but few would be able to listen to them). When cut at 33 1/3 you can hold approximately 12:00 minutes per side. When cut at 45 you can hold approximately 9:00 minutes per side.

What is the normal size of a vinyl record?

Records come in a range of different flavors based on competition and consumer tastes. The most common sizes are seven, 10, and 12 inches in diameter, but size isn’t the only way to identify what kind of vinyl record you have.

How much does it cost to press a 7 inch vinyl?

Rates usually depend on the length of the record per side. This can range from $150 – $230 per side ($300 – $460 per record) with the average being around $200 per side ($400 per record).

How long is a 7 inch record?

7 inch records (also called “45s”) are referred to by their playback speed of 45 rpm and their standard diameter of 7 inches. At 45 rpm they hold around 4-6 minutes per side.

What is a 10 inch vinyl?

10 inch vinyl records are great for shorter length (EP) albums. At 33 rpm they hold around 12-15 minutes per side. At 45 rpm they hold around 9-12 minutes per side. 33 rpm is the most common speed for 10 inch records.

How do you tell if vinyl is 33 or 45?

You can usually tell if a record is a 33 RPM or 45 RPM by looking at the label. Also, if it’s vinyl, it’s not a 78.

How long does it take to press vinyl?

The whole process of pressing and trimming the record takes under 30 seconds.

Can you play a 7 inch vinyl?

All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.

What does 7 inch version mean?

As other answers have mentioned, in the context of song titles, 7″ Version does not refer to time; it is just another way of writing Seven-Inch Version, meaning a version which was intended for release on a 7-inch single, a.k.a. “a 45”.

Why is vinyl so expensive?

Supply and demand drives pricing and a lot of the record market is trying to artificially control supply. Records are limited, colored, printed on cat hair etc so that the collectors market will pay high prices for them.

What is a 7 single?

7-inch format The names are derived from its play speed, 45 rpm, and the standard diameter, 7 inches. The 7-inch 45 rpm record was released 31 March 1949 by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.

What does LP mean?

Long PlayThe LP (Long Play), or 33 1⁄3 rpm microgroove vinyl record, is a format for phonograph (gramophone) records, an analog sound storage medium. Introduced by Columbia Records in 1948, it was soon adopted as a new standard by the entire record industry.

Does vinyl sound better?

Because of their materiality, records offer sound qualities that digital formats do not. These include warmth, richness, and depth. Many people value those qualities and so hold vinyl records to sound better than digital formats.

Is there a difference between vinyl and records?

Vinyl is a specific material that records are made of. The terms are often used interchangeably since all modern records are normally made of vinyl. … Over the years, there has been no differentiation between records and vinyl. However, vinyl is a type of record.

What happens if you play a 45 record at 33?

If you play the record at 45 instead of at 33, that puts the frequencies recorded on the record 45/33 times as high, which means that as far as the record is concerned the effect of the stylus is what it would be if the resonance were at 13KHz while you played it at 33.

What are the different vinyl sizes?

Vinyl records come in three speeds: 33 1/3 rpm (often just called a “33”), 45 rpm and 78 rpm. The “rpm” is an abbreviation for “revolutions per minute” — an indication of how fast the record is meant to spin on the turntable.

How do I play a 7 inch vinyl?

Most 7 inch records are singles (one song on each side) and play at 45 rpm. A few 10inch records are 78 rpm. All record players take all sizes as the needle is placed on the disc manually. You need to check the correct rpm but there will be selector to change this.

Does the size of the vinyl matter?

Vinyl comes in different sizes mainly based on how much music is contained on the record. A standard 7-inch single is smaller than a full-length album because it contains less music, and is intended to be less expensive.